The most important innovation is the use of passive slides which glide over the staircase with a high standard of safety and without requiring any effort. An attentive study of the chair underlines a high esthetical value with a new concept of style.

The rugged look is a mix of the technical details found in the unique form of the frame or the clearly original position of the seat.

Precious aesthetic details are offered by the angled parts, the inclination of the telescopic backrest, the headrest adjustable in height and the leaning transport handle which is distinctively the continuation of the outline.

A peculiarity of the Pro Skid-E is that there is no support to maintain it in the vertical position.

An attentive study of new geometrical solutions offers the device complete stability even in this mode.

Pro Skid-E is equipped with its own exclusive handle system: the front telescopic handles offer the possibility to adjust the grip in depth so as to guarantee that the operator always has the best angle for both upward and downward movement while the rear handles can be completely folded away so which reduces clutter space during storage.

In international rescue scenes the spine board has become an essential element. Carrera Pro is ready to welcome the spine board into the space under the loading level of the stretcher. The fixation is practical and is achieved when pressure is applied. To reset the backrest or to select intermediate positions you can use just one hand for moving the handle and contemporarily sustaining the weight. Larger wheels improve impact with the loading level of the ambulance. Punctured ferrule to select the correct position of the loading level permitting adaptation to any vehicle platform level. The manageability of stretchers with larger wheels has been additionally enhanced thanks to a new design of the front legs and use of a new frame support for the rear legs. Crash-assist system to assure safety during loading and unloading procedures.

The wheels glide on the ambulance floor/level to simplify the loading and unloading operations. Brakes on the rolling movement and on the axis. The manoeuvring handles are positioned in a rational and unambiguous way; thanks to their articular form they adapt to the anatomy of the hand and the presence of such a long slideway makes it impossible to accidentally activate them. The Pro model has a structural niche for the positioning of the Bbak spine board. Lateral handles for the resetting of the original position and to select the Fowler position.

Technical Data:

• Length: 1970 mm
• Width: 570 mm
• Loading height: from 590 to 740 mm
• Weight: 35 kg
• Load capacity: 160 kg
• Reclining sidebars: Yes
• Length: 630 mm
• Height: 180 mm
• Wheels Ø 200 mm: Yes, 2 fixed anterior, 2 360° swivelling with, brake posterior
• Cardo pulmonary resuscitation: Yes
• Headrest /regulating backrest: Yes
• Minimum opening angle of backrest 75°1970 mm: Yes

Additional Information:

• Item Code: CARRERA-PRO-S

A special B-bak, very much appreciated by rescue teams, it puts together its famous technical characteristics and a built in system that allows to fix the restraints to the board. The side handles are translucent incorporated elements, they allow you easy buckling-unbuckling operations for a fast and safe anchorage of the patient’s restraints with shackle.

High density completely recyclable polyethylene, moulded into a unique, one piece shell; this technique guarantees the - B-bak the following exclusive characteristics:

• rigidity and lightness
• resistance to bumps and corrosion
• completely waterproof (does not absorb liquids)
• immune to infiltrations
• easy to clean (water and soap are sufficient)
• totally X-ray compatible (the patient can be removed from the spine board even after carrying out X-rays or CAT scan investigations).

Technical Data:
 

• Dimensions: 410x50xh1840 mm      
• Material: HDPE      
• Weight: 8 kg      
• Load capacity: 180 kg      
• Temp. of use: -20 +60 C°      
• No. of handles: 14      
• Flexybility with 180kg at -10 C°: 25 mm      
• Flexybility with 180kg at 20 C°: 40 mm      
• Flexybility with 180kg at 50 C°: 42 mm  

Features:

• Two external side pockets with zip closing
• A front pocket with a small removable transparent bag
• Big central compartment with adaptable padded separators. 

Technical Data:
 

• Dimensions: 455 x 285 x h320 mm      
• Capacity:41 L      
• Weight : 1,1 kg      
• Material: Ripstop 840 D      
• Carry strap: Yes      
• N. of handles:1      
• Lateral pockets:Yes      
• Front pocket: Yes      
• Rigid double: Yes      
• bottom: Yes      
• Bottom reinforc: Yes      
• Reflective insert: High density expanded      
• Internal material: Blue      
• Color: Yes, hot print      
• Personlization: 100x50 mm front     

A system created by Spencer to immobilize joints effectively, simply and practically. The Blue Splint immobilization system, made in five shapes, has changed its way of treating fractured or sprained joints. All splints can be modelled according to the necessity of each case and, once obtained the desired profile, the splint will offer extraordinary rigidity. To place the splint in a straight position it is sufficient to straighten by hand the inside structure. The Blue Splints are extremely light and could be overlapped with each other to create an infinity of configurations and solutions. They can be used for adults and children of every size. The versatility and the compactness that characterize the splints make them useful for the rescuer even in the most strange of situations. The arm and forearm splints are also used as an armrest during intravenous infusions. Perfect for ambulances, medical cars, mountain rescue, sport medicine, water rescue, orthopaedic centres, first aid and all kinds of emergency departments. The lightness of the complete kit and the reduced dimensions make it the most cumbersome and compact system on the market.

Technical Data:

• Dimensions (bag): 640x100xh310 mm      
• Weight: 1,5 kg  

Eva is a transport chair, dedicated to the transport of patients during rescue, transport and evacuation operations, which presents a lot of novelties.

In the past few years in fact, new styles of social behaviour and new operational protocols for both professional and occasional operators have been established.

The aesthetic codes, used by these new protagonists, are moving towards a more dynamic, courageous and anti-conformist reality. Our project managers have transferred this conception into a completely renewed operational contest.

The research has been concentrated on new and innovative alloys and plastic materials, which are able to guarantee a high standard in both the most extreme and intensive situations.

Our goal has been to develop a product which expresses transparency, lightness, dynamicity, resistance; all the main characteristics expected from a highly technological product of extremely high quality level.

Eva is the result of this research: an integral project which conceptually unites the product’s production process and its formal dimensions.

The structural parts and mechanisms are made out of metals already tested in other fields and differenced according to the function of the different components.

The texture of the materials is an important characteristic a project like this where we mechanical components and a strong personality are recognizable.

Technical Details:

• Material: Aluminium/Steel
• Height open: 1350 mm
• Height folded: 979 mm
• Width: 480 mm
• Thickness folded: 305 mm
• Lenght : 1151 mm
• Lenght w/ext. handles: 1402 mm
• Surface treatment: Chromed
• Frame colour : Chrome
• Sheet colour: Black
• Weight :16,7 kg
• Load capacity: 150 kg
• Pre tightened slides: Yes
• 2 front wheels Ø: 100 x 32 mm
• 2 rear wheels Ø: 150 x 32 mm
• Front turning wheels Ø: 100 x 32 mm
• Available with armrest: Yes
• Covering armrest: Expanded PU
• Belts propylene 50 mm: Metal with retractor
• Rear wheel brakes: Yes
• Seat padding: Yes
• Spentex® sheet: Yes
• IV pole support: Yes

Versatile and simple to use Air Splints are used to immobilize arm and leg fractures, with uniform pressure on the limb, and to guarantee stability and comfort for the patient. A unique characteristic of these inflatable splints is the zipper. Made on a flexible, plastic support which allows for HFW onto a PVC sheet; this process of production gives the splint a strong and long-lasting hold. A careful selection of materials makes Air Splint extremely lightweight, anti-allergenic and transparent, allowing the observation of the injured limb. The pressure in the air room can be controlled by inflating or deflating air, through the valve. X-rays can be carried out without removing the splints. They are available in three sizes for the upper limbs.

The Eco Air Splint kit contains:

• three splints of different sizes for the arm
• three splints of different sizes for the leg
• bag made of unbreakable nylon for the containment of
• the splints

 
Technical Details:
 

• 330x50xh420 mm: 330x50xh420 mm
• HFW + PVC: HFW + PVC
• 1,5 kg: 1,5 kg 

Sizes:
 

• Air Splint arm (370 x 420 mm)
• Air Splint arm (640 x 460 mm)
• Air Splint arm (740 x 530 mm)
• Air Splint leg (420 x 370 mm)
• Air Splint leg (695 x 370 mm)
• Air Splint leg (860 x 370 mm)

Spencer 190 is a pulmonary ventilator of the latest generation, with a one stroke cycle, limited to pressure and controlled by a powerful micro-processor. It guarantees flowing pressure, respiratory
frequency and constant fraction of inspired oxygen, independent from the insufflation pressure.

The respiratory act is completely monitored. When ABS is inserted the form of the luminous wave allows easy synchronisation of the instrument with the patient. The safety of the patient is guaranteed by monitoring systems and alarms of the airway pressure, power pressure and apnea. The compact structure, limited weight, simplicity of regulation and control of the parameters, the incorporated visual and acoustic security devices allow safe use even by untrained lay people.

The control instruments are designed in such a way as to allow clear and immediate reading. Complete with:

• PVC patient circuit tube
• Spencer Mask size 4
• non-rebreathing valve

Ventilation mode:
 

• Controlled – assisted - assisted/controlled (ABS)
• Electronic security overpressure:

adults: 55 mbar / children: 25 mbar

Alarms:maximum pressure, minimum pressure, apnea, battery, medical gas

Luminous indications:spontaneous inhalation and ventilation mode

Reset alarms: 30 sec LED test / Digital keys
 
Technical Details:
 

• Drive: microprocessor
• Frequency: from 5 to 40 BpM
• Capacity: from 2 to 20 L/min
• I/E connection: 2-Jan
• Sensitivity trigger: from 0 to -20 cm H2O
• H2O concentr: from 60 to 100%
• Security valve: from 15 to 70 cm H2O
• Med. gas power: 3,5 kg/cm ± 0,5
• Battery duration: around 3 hours
• Patient circuit: corrugated tube
• Non-breathing v: autoclavable
• Vacuum manom.:12 Vdc
• Internal power:12 Vdc
• Structure: varnished aluminium with epoxy powder
• Panel: permanent polycarbonate
• Dimensions: 330 x 175 x h180 mm
• Weight: 4,8 kg
   

Additional Information:

• Item Code: SPENCER-190

We have concentrated on the functionality of the product: a lightweight bag, easy to handle and easy to clean. Eliminating the superfluous, all you have left is the handiness of the product and the convenience of its price. Made of nylon, it has a central compartment where you will find on the inside a premodelled and semi-rigid compartment with three dividers to store a small oxygen tank and other resuscitation devices. The closure of the top flap is fast and safe thanks to the Velcro® strap all around the front border. There are also two side pockets with zipper. The Emergency stands out for the global character of its range: it is available in fact in different languages.

Technical Details:

• Dimensions: 525 X 215 X h230 mm
• Capacity: 26 L
• Weight: 0,7 kg
• Material: Ripstop 600 D
• Carry strap: Yes
• Lateral pockets: Yes
• Rigid double bottom: Yes
• Bottom reinforcement: Yes
• Reflective insert: Yes
• Int. material: Alveolar polypropylene
• Personalization: Yes, hot print 180 x 80 mm

The most compact and technologically advanced evacuation chair by Spencer Skid Ok reaches high quality standards through the use of innovative material sand components that make it lightweight and manoeuvrable, able to operate without compromise in any operational scenario.It features an aluminium frame, welded and polished and an adjustable seat,reinforced with Spentex®.The innovative self braking system on the slides allows the operator a perfect control during the descent of the stairs.The Skid Ok chair is supplied with two polypropylene 50 mm straps.

Additional Information:

• Item Code: SkidOK

Thanks to reduced clutter, the stretcher is used as an emergency stretcher and also in conditions where storage space lacks.

• Complete with two orange quick-release restraints
• Reflecting mark to increase nocturnal visibility
• It is also available in the decontamination version
•  

Technical Details:
 

• Foldable stretcher: Yes
• Length open: 2010 mm
• Length folded : 1000 mm
• Width open: 400 mm
• Width folded: 105 mm
• Height open: 140 mm
• Height folded: 165 mm
• Weight: 6.5 kg
• Load capacity: 170 kg
• N. of carrying points: 4
• Feet: 4
• Handle: Yes
• Frame: Aluminium
• Reflective mark: Yes
• Steel folding mechan: Stainless
• Two belts : Yes
• Sheet color: Orange
• Sheet material: Spentex®
• Electronically welded: Yes

Additional Information:

• Item Code: SPENCER-122

Indispensable for head immobilization. The Super Blue can be used with spine boards and the scoop stretcher. It is made of high density foam, covered with water repellent material.

Features:

• Easy to use
• Washable and easy to stock
• The head supports have an anatomic profile and offer a stable and comfortable support
• The head support’s position can be adjusted thanks to the use of a highly resistant type of Velcro®
• The head immobilizing straps are made out of polypropylene and are padded in corrispondance to the part in contact with the patient’s face
• The positioning of the base is very easy, thanks to the Velcro® fixed to the lower part of the base.
• The base is reinforced in the areas most exposed to use. 

Technical Details:
 

• Total weight (kg): 1 kg
• Compatibility with spine board: All
• Fixation straps: 2
• Type of fixation: Velcro® / straps
• Dimensions (mm): 384 x 21 x h290
• Type: Stuffed
• Material: Expanded PE / Spentex®
• Manufacturing system: Injection
• Colour: Blue
• Head blocks
• Dimensions (mm): 245 x 80 x h160
• Weight (kg): 0,5
• Structure: Stuffed pillows
• Material: Plastic compound
• Manufacturing system: Injection
   

Additional Information:

• Item Code: SUPER-BLUE

For excellent, quality, hard work and love for details are necessary. With this craftsmanship we are able to achieve the perfection that distinguishes our Hirvin injury transportation sheets. Scrupulous controls guarantee that every sheet responds to high standards of quality. In fact the Spencer logo is a worldwide symbol of high quality.

During the realisation of the Hirvin injury transportation sheets a lot of attention was given mainly to the ergonomic aspect, considering the actual structural dynamic conditions as during
use by the operator.

The invisible details that express it’s robustness and manageability.

• The composition, weight and framework of the material:
• 550 D nylon coated twice with poly-vinyl (Spentex®) The composition, weight and finishing of the tape:
• 50 mm nylon tape with breaking load in traction 600 kg
• finishing to improve softness Types and configuration of the reinforcements:
• cross lock stitching that exploits the new electric control system of the tension of the thread (active tension), the length of the point and the width of the crosses. The safety stitching:
• doubled in correspondence to all joining points subject to traction; all carried out with nylon fibre thread. The quality of the thread:
• the thread, as with the stitching system it is very important, because the stitching is made to last; a resistant, unbreakable nylon thread is used

 
Technical Details:
 

• Dimensions: 1850 X 760 mm
• Weight: 1 Kg
• Material: Nylon & Polyvinyl
• N° handles : 6 (3 each side)
• Load capacity: 150 kg

Tango is the only backboard on the market that can split itself into two. The innovative paediatric board Baby Go that lives alongside the adult board.

Two devices that allow the simultaneous double rescue for adult and paediatric patient, a single solution that represents the constructive Spencer excellence.

The paediatric spine board Baby Go Baby go is an essential support helps in keeping the pediatric
patient's backbone height between 45 and 150 cm in its natural
position and obtaining an optimal alignment of the respiratory
tract.

Adult spine board Thanks to its X-ray compatibility and its handgrip on all sides,
the adult board allows a correct immobilization and an easy
transport.

Technical Details:

• Dimensions: 445 x 55 x h1830 mm
• Material: LLPE
• Weight: 8 kg
• Load capacity: 180 kg
• Temp. of use: -20 +60 C°
• No. of handles: 14
• Flexibility with 180kg at -10 C°: 20 mm
• Flexibility with 180kg at 20 C°: 40 mm
• Flexibility with 180kg at 50 C°: 50 mm

Additional Information:

• Item Code: TANGO

Effective chest compressions deliver vital oxygen to the brain and can prime the heart for a successful shock. Maintaining sufficient coronary perfusion pressure during cardiac arrest improves the likelihood of return of spontaneous circulation (ROSC).

The LUCAS Chest Compression System is designed to deliver uninterrupted compressions at a consistent
rate and depth to facilitate ROSC. It delivers automated compressions from first response in the field to
ambulance transport and throughout the hospital. LUCAS facilitates consistent blood flow from the
moment it is turned on, helping to improve a patient’s chance for a successful outcome.

Increasing opportunities for improved outcomes:

Effective, consistent and uninterrupted compressions according to current AHA guidelines LUCAS is a portable, easy-to-use device that delivers automated, guidelines-consistent chest compressions to improve blood flow in victims of cardiac arrest. LUCAS performs at a rate of at least 100 compressions per minute with a depth of at least 2 inches. It also allows for complete chest wall recoil after each compression and provides a 50% duty cycle equal compression and relaxation time for the chest wall.

Maintain good blood flow:

Several studies show the effectiveness of manual chest compressions can drop rapidly often after only one minute due to rescuer fatigue.2,3 With LUCAS, automated compressions are delivered consistently and continuously, helping to maintain good circulation to the patient during transport and throughout the hospital.

A rescue stretcher specifically designed for the recovery of victims in difficult and cramped situations, especially where the patient has to be raised and carried to safety. Made with semi-rigid splints and high resistant cotton. It guarantees utmost safety for the patient also during lifting.

Thanks to a robust construction and a practical storage system it becomes indispensable for rescue in:

• mines
• industries
• building sites
• ships

 
Technical Details:

• Dimensions: 1080 x 20 x h1830 mm
• Weight: 7 kg
• Load capacity: 220 kg

Additional Information:

• Item Code: NRT

The inside of the Professional Emergency Rucksack is divided into two rigid compartments and the back is covered with two large bands of velcro for the pouch to attach onto.the Inside of the front flap has a big pocket divided Into 4 zip closed compartments. The bottom area Is covered with an expanding pouch to optimise the space. On the outside of the front flap there are two big pockets with zip closure. The handle on the top and on the side make the rucksack easy to carry as a bag.

Technical Details:

• Dimensions: 500 x 220 x h450 mm
• Volume: 50 L
• Weight empty: 2.3 kg
• Weight with contents: 11.9 kg
• External fabric: Nylon Oxford
• Back fabric: Nylon Oxford
• Internal fabric: Polyester
• Structural material: Corrugated PE
• Inner fabric: Polyester
• Structural material: Corrugated PE
• Handle cover: TPU
• Strengthened base: Yes
• Padded shoulders: Yes
• Frontal compartments: Yes
• Inner pockets: 2
• Gas cylinder fixing: Yes
• Zip pulls: Yes
• Reflective inserts: Yes
• Maxizaino: CB04040

Additional Information:

• Item Code: MAXIZAINO

Roll-in stretcher trolley with adjustable heights black board

Made in lightweight stainless steel and high density polyethylene, the Cross is practical as well as comfortable to use. Bigger and stronger wheels make the difference in moving patients on rough terrain, as stability and balance are enhanced. The side bars are safely locked thanks to a quick-release mechanism, which prevents accidental unlocking. One of the most important features of the Cross is its flexibility: the agile stretcher can be adapted to any type of vehicle.

Lightweight, fast, precise, multi-skilled and consistent to name a few are the wonderful characteristics of this revolutionary stretcher, which is the result of the experience of Spencer’s research and development efforts. It is the attention to detail that makes a stretcher special. Discover how ergonomically detailed the Cross is.

Technical Details:
 

• Length: 1970 mm      
• Shortened lenght: 1465 mm      
• Width: 570 mm      
• Loading height: from 480 to 750 mm      
• Weight: 38,7 kg      
• Load capacity: 160 kg      
• Folding side bars:  yes      
• Length: 630 mm      
• Height: 180 mm     

Additional Information:

• Item Code: CROSS

Scoop Stretcher 3 Blades with 3 Belts is a device which enables the lifting and loading for a patient onto immobilising or transport devices such as spinal boards, vacuum mattresses or transport stretchers.

It is essential for the loading trauma patients by two rescuers: with use of this device patient can be picked up without changing position and the trunk and limbs can maintain the supine position
while loading.

The structure and mechanism of the SPENCER SX offer maximum reduction of the movement required.

The SPENCER SX does not offer any type of isolation. No action on behalf of the patient is expected.

This model is supplied with three belts.

Technical Details:

• Material: Aluminium
• Weight: 9.9 Kg
• Load capacity: 170 kg
• Height: 65 mm
• Width: 435 mm
• Minimum length: 1665 mm
• Maximum length: 2168 mm
• Folded length: 1200 mm
• Finishing: Anodized

Additional Information:

• Item Code: Spencer-SX

This particular immobilization system has exceptional characteristics.

A thin layer of aluminium is covered with expanded closed cell polypropylene, impermeable to fluids and blood, and it is X-ray compatible.

When it is longitudinally nerved, the splint becomes a semirigid support for the distal parts of the limbs.

The surface is soft and sufficiently resistant to be sanitised and re-used over again.

Thanks to its small size, it can be placed inside all types of first aid kits.

Available in different sizes.

Technical Details:

• Lenght: 905 mm
• Width: 5 mm
• Height: 108 mm
• Material: Aluminium / polypropylene
• Use temperature: From -10°C to +55°C
• Storage temperature: From -20°C to +60°C

The exclusive Spencer Contour head immobilizer has been studied to assure the optimum head immobilization of traumatised patients. If used in combination with a spine board and a rigid cervical collar, it enables the transportation of a patient in critical condition during long or uncomfortable
journeys. A good fixation of the head also gives the rescuers the possibility to take more time to give extra care to the patient in a secure condition for the cervical tract. The exclusive form of the head immobilizer has been designed by rescue experts and has been tested on the road. This form physiologically supports the brain case, avoiding as much as possible further compression of the cranium and completing the immobilization of the rachis supplied by the cervical collar. Spencer Contour head immobilizer is composed of two mono blocks, made of a soft plastic material and a base
with belts to fix to various kinds of stretchers. The two shells are positioned with a very resistant Velcro® fixation system on the purpose made base, which is fixed onto any type of spine board with the belts provided or by using the Velcro® system. Holes have been made inside the two shells,
which allow the inspection of the aural pavilions, permitting the verification of any loss of blood or liquids. Moreover, the holes generously accommodate the aural pavilions, allowing the rescuers to communicate with the patient. A new system of moulding has allowed a shell without solution of continuity and with a considerable thickness of the protective film, which guarantees a long duration. The base can be used to fix two mono blocks for adult and paediatric patients, thanks to an additional cushion that can be removed. The material used for the production of the shell is impermeable and avoids the absorption of organic liquids (blood, vomit, mucous). It cannot be damaged by chemical substances or solvents, cannot be modified by physical agents and stays soft even when the temperature varies. It can be easily cleaned and is X-ray compatible.

Technical Details:

Base:

• Dimensions: 390 x 15 x h260 mm
• Weight: 0.5 kg
• Type: Removable layer
• Material: Expanded PE - Spentex®
• Manufacturing system: Injection
• Color: Blue

Head blocks:

• Dimensions: 235 x 130 x h160 mm
• Weight: 1 kg
• Structure: Stuffed pillows
• Material: Plastic compound
• Manufacturing sustem: Injection
• Color: Blue
• Fixation: Velcro® - Straps
• Auricular inspection: yes

The Spencer Shell Universal Basket Stretcher, has been studied to confront the most difficult of emergency situations. It is ideal for rescue operations in mines, at altitude and in water. Thanks to its robust form, resistance and flexibility of use, it is indispensable anytime that a reliable and safe stretcher is needed. A revolutionary technique has been used in its realization which ensures uniform thickness of the entire length of the stretcher. The shell is in high-density polyethylene and is joined to an aluminium framework that aims to consolidate its strength. The handles for transport, which are part of the structure itself, are placed along the entire perimeter. The grommets for the fixing of the spring catches of the harnessing are in stainless steel. Inside the shell there is a removable mattress, applied with Velcro®, made in closed-cell EPDM, which makes it impermeable to both blood and water. The use of high-density polyethylene for this shell guarantees not only that it is shatterproof but also an exceptional sanitization. The Spencer Shell can contain a spine board.

Comes with:

• nylon rope along entire perimeter
• three 50 mm nylon belts with quick-release buckles
• water resistant, closed-cell mattress
• footrest in pre-formed polyethylene with position regulator

The use of high density polyethylene moulded with this technology, gives a consistency to the thickness that is much higher than that achieved with other forms of moulding; the advantages are evident in the corners, curves and on the base, exactly where the other bodies prove to be more fragile. The body is resistant to damage and corrosion and has been joined to an aluminium framework
to guarantee a demanding use and safe transportability in helicopters.The tapered form allows it to take all the Spencer spine boards, thus avoiding any annoying movements of the board itself. 

The moulding technology used for this shell offers consistency and uniformity of thickness, the resistance to damage and corrosion much higher than that attained
with other forms of moulding, especially in the areas where the other systems are more usually more fragile and delicate (corners, tapering). The design favours the functionality and leaves space to position the Spencer Rock or B bak spine boards.

Technical Details:

• Length: 2150 mm
• Width: 650 mm
• Height: 190 mm
• Load capacity: 280 kg
• Weight: 13,5 kg

The EMSoft splints are made of coupled vinyl with an ultrasonic welding process. They are easy and fast to model. They can also be used for exposed fractures. The standard version has Velcro® closure straps. X-rays can be performed without removing the splints. The valve, welded onto the PVC sheet, guarantees a strong hold; thanks to a one way system, it avoids air from entering when the vacuum pump is removed.

Technical Details:

• Dimensions EMSoft Kit three sizes: 910 x 170 x h650 mm, Weight EMSoft Kit two sizes- 2,8 kg, Weight EMSoft Kit three sizes- 3,6 kg
• Functioning temperature: from –5 to +40 °C
• Storage temperature: from –10 to +50 °C
• The EMSoft kit is complete with: splint size S (750 x 600 mm), splint size M (900 x 700 mm),only into kit including three sizes, splint size L (1100 x 800 mm), vacuum pump, Ripstop case
• Weight (kg) size S: 0,6
• Weight (kg) size M: 0,9
• Weight (kg) sizeL: 1
• External covering: Vinyl
• Internal material: Polystyrene
• HFW: Yes
• X-ray compatible: Yes
• Latex free: Yes
• Temperature of use (°C): -5 +40
• Temperature of storage (°C): -10 +50

Additional Information:

• Item Code: EMSOFT

Additional Information:

• Item Code: Res-Q-Board

Additional Information:

• Item Code: Davis

Emergency trolley extremely versatile and robust. The system of 4 coaxial wheels ensures high load
resistance while dragging on the ground.

Specific Characteristics:

• Excellent portability thanks to the trolley system, 2 handles and shoulder strap
• 1 main compartment with straps for fixing the tank (max 2l), and 2 transparent pockets with strap closure.
• 2 Side pockets with zip closure
• 1 Front transparent pocket with strap closure
• 1 Front pocket with zip closure
• Front detachable backpack with padded shoulder straps
• Reflective inserts for greater visibility
• Reinforced bottom

Standard Equipment:

• 4 R-Series internal bags with strap fixing

Technical data:
 

• Dimensions: 400 x 300 x 570 mm
• Weight: 3,8 kg
• Volume: 40
• Materials: Nylon, PVC, PE, AL
• Maximum: Load 30 kg

Additional Information:

• Item Code: R-AID